Manufacturer: MikroTik

MikroTik RBwAPR-2nD - wAP R

Product.Nr.: RBwAPR-2nD

Manufacturer: MikroTik

101,15 EUR
incl. 19 % VAT

  • Zur Zeit nicht lagernd, bitte per E-Mail anfragen. Zur Zeit nicht lagernd, bitte per E-Mail anfragen.
  • delivery time auf Anfrage: sales@mikrotik-store.eu
  • weight 0,6 kg

product description

#1: RBwAPR-2nD - wAP R

The wAP R is a small weatherproof 2.4Ghz wireless access point with a miniPCI-e slot (so you can use your own LTE card) and LTE antennas. Unit comes with one 10/100 Ethernet LAN port for your wired devices.

The weatherproof device can be mounted outside your house, in the vehicle, on your porch or anywhere else where you need wireless access from your phone or computer. It also includes a desktop stand so you can put it inside the building near a window.

Unit has the several powering options - 9-30V PoE-in by Ethernet port, DC jack and automotive connector, very handy in mobile devices like car, bus or train.

*) the device has no built in LTE modem, the SIM slot can only be used, if an LTE modem is installed (not included with the product).

 

#2: Included in delivery

  • 1x RBwAPR-2nD (wAP R)
  • 1x 24V 0.8A power adapter
  • 1x PoE injector
  • 1x Plastic zip tie
  • ​​​​​​​1x 0.35m 4pin Automotive adapter cable
  • ​​​​​​​1x wAP desktop stand
  • ​​​​​​​1x wAP ceiling mount bracket
  • ​​​​​​​1x K-50 locking set
  • ​​​​​​​1x Elastic thermal pad 25x40x3,2mm
  • ​​​​​​​1x K-52 fastening set
 

#3: Specifications - Technical details

Details
Product code RBwAPR-2nD
Architecture MIPSBE
CPU QCA9531
CPU core count 1
CPU nominal frequency 650 MHz
Dimensions 185x85x30 mm
RouterOS license 4
Operating System RouterOS
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
MTBF Approximately 100'000 hours at 25C
Tested ambient temperature -40°C to 60°C

Wireless capabilities

Details
Wireless 2.4 GHz Max data rate 300 Mbit/s
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 2
Wireless 2.4 GHz chip model QCA9531
Wireless 2.4 GHz generation Wi-Fi 4

Ethernet

Details
10/100 Ethernet ports 1

Peripherals

Details
Number of SIM slots 1 Modem (Mini SIM)
MiniPCI-e slots 1

Powering

Details
Number of DC inputs 3 (DC jack, PoE-IN, Automotive)
DC jack input Voltage 9-30 V
Automotive input Voltage 9-30 V
Max power consumption 6 W
Cooling type Passive
PoE in Passive PoE
PoE in input Voltage 9-30 V

Certification & Approvals

Details
Certification CE, FCC, IC, E-MARK, EAC, ROHS
IP IP54

Other

Details
PCB temperature monitor Yes
Voltage Monitor Yes

Wireless specifications

2.4 GHz Transmit (dBm) Receive Sensitivity
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71
 

#4: Test results according to RFC2544

Ethernet test results

RBwAPR-2nD QCA9531 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase..
 

#5: Product video & tips