product description
Description: Mikrotik Metal 5 - RBMetal5SHPn
Mikrotik's new, completely waterproof, rugged, and super high powered RouterBOARD Metal. The serious outdoor wireless device!
Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1300mW of output power - to reach the last mile, in any conditions! It comes with L4 license, so you can attach your favorite 5Ghz antennna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer!
It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.
Note from Mikrotik-Store.eu: For the transition from the routerBOARD connector to the antenna, we usually use self-sealing electro-insulating tape, for long-lasting protection against water penetration.
Content of delivery:
- Metal 5 (RBMetal5SHPn)
- Fast Ethernet PoE-Injektor
- 24V 0.8A Power Adapter
- angled N connector
- 2x metal rings
- plastic zip tie
Note: a antenna is not included!
Technical details:
Product code | RBMetal5SHPn |
CPU nominal frequency | 400 MHz |
CPU core count | 1 |
Architecture | MIPS-BE |
Size of RAM | 64 MB |
10/100 Ethernet ports | 1 |
Wireless chip model | AR9280 |
Wireless standards | 802.11a/n |
PoE in | Yes |
Supported input voltage | 9 V - 30 V |
Voltage Monitor | Yes |
PCB temperature monitor | Yes |
Dimensions | 177x44x44mm, 193g |
Operating System | RouterOS v5 |
Tested ambient temperature | -30C to +70C |
License level | 4 |
CPU | AR7241 |
Max Power consumption | 11.5W |
Number of chains | 1 |
Storage type | NAND |
Storage size | 128 MB |
Wireless details:
5 GHz | |||
---|---|---|---|
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
6MBit/s | 31 | -93 | 1259 |
54MBit/s | 27 | -77 | 501 |
MCS0 | 30 | -92 | 1000 |
MCS7 | 28 | -71 | 631 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet details:
RBMetal5SHPn | AR7241 100M 1 port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 8.1 | 98.6 | 23.5 | 96.3 | 148.0 | 75.8 |
Bridging | 25 bridge filter rules | 8.1 | 98.6 | 23.5 | 96.3 | 53.7 | 27.5 |
Routing | none (fast path) | 8.1 | 98.6 | 23.5 | 96.3 | 148.0 | 75.8 |
Routing | 25 simple queues | 8.1 | 98.6 | 23.5 | 96.3 | 92.8 | 47.5 |
Routing | 25 ip filter rules | 8.1 | 98.6 | 23.5 | 96.3 | 37.5 | 19.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Switchting details:
-
Downloads
Metal5-Brochure.pdf (0.45 MB)
Metal5-Declaration-of-conformity(CE).pdf (0.10 MB)
Metal5-QuickGuide.pdf (0.11 MB)