product description
Mikrotik RB411U is a versatile yet very small device. It includes all - a miniPCI slot (for 802.11 wireless cards), a USB 2.0 port and a miniPCIe slot for connecting a 3G card (does not support 802.11 wireless cards). A SIM card slot for 3G is also present on the RB411U. RB411U includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a mobile 3G router, and more - all at the same time. You can use the USB port to attach a secondary storage device, or a USB 3G modem. The RB411U mounting holes are in the same location as other RB411 models, so you can easily mount it into any supported outdoor case/antenna.
-
Specifications
Details | |
---|---|
Product code | RB411U |
Architecture | MIPSBE |
CPU | AR7161 |
CPU core count | 1 |
CPU nominal frequency | 300 MHz |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 32 MB |
Storage size | 64 MB |
Storage type | NAND |
Tested ambient temperature | -40°C .. +70°C tested |
Powering
Details | |
---|---|
Max Power consumption | 12W |
PoE in | Passive PoE |
PoE in input Voltage | 10-28 V |
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 10-28 V |
Ethernet
Details | |
---|---|
10/100 Ethernet ports | 1 |
Peripherals
Details | |
---|---|
Number of SIM slots | 1 Modem (Mini SIM) |
MiniPCI slots | 1 |
MiniPCI-e slots | 1 |
Serial port | RS232 |
Number of USB ports | 1 |
USB slot type | USB type A |
Max USB current (A) | 1 |
Other
Details | |
---|---|
Voltage Monitor | Yes |
-
Ethernet test results
RB411U | AR7130 100M 1 port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none | 8.1 | 98.6 | 23.5 | 96.3 | 97.3 | 49.8 |
Bridging | 25 bridge filter rules | 8.1 | 98.6 | 23.5 | 96.3 | 41.0 | 21.0 |
Routing | none | 8.1 | 98.6 | 23.5 | 96.3 | 79.4 | 40.7 |
Routing | 25 simple queues | 8.1 | 98.6 | 23.5 | 96.3 | 67.8 | 34.7 |
Routing | 25 ip filter rules | 8.1 | 98.6 | 23.5 | 96.3 | 24.7 | 12.6 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Downloads