MikroTik RouterBOARD RB411GL
Product.Nr.: RB411GL
Manufacturer: MikroTik
94,01 EUR
incl. 19 % VAT
-
Zur Zeit nicht lagernd, bitte per E-Mail anfragen.
- weight 0,2 kg
product description
This product is EOL - End of Life
-
The RB400L is our new low cost series. The RB411GL has one miniPCI slot, one Gigabit Ethernet port and a USB port for 3G or storage. Use this device in an outdoor case for an AP device, or for a point to point wireless link installation. The miniPCI slot allows you to choose your own preferred wireless card model. The Gigabit port allows you to fully benefit from the 802.11n MIMO wireless speed. It’s powered by an Atheros 680MHz CPU and has 64MB of RAM and a Level4 RouterOS license.
-
Specifications
| Details | |
|---|---|
| Product code | RB411GL |
| Architecture | MIPSBE |
| CPU | AR7161 |
| CPU core count | 1 |
| CPU nominal frequency | 680 MHz |
| Dimensions | 105x105mm |
| License level | 4 |
| Operating System | RouterOS |
| Size of RAM | 64 MB |
| Storage size | 64 MB |
| Storage type | NAND |
| Tested ambient temperature | -40°C .. +70°C tested |
Powering
| Details | |
|---|---|
| Max Power consumption | 13.6W |
| PoE in | Passive PoE |
| PoE in input Voltage | 8-30 V |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 8-30 V |
Ethernet
| Details | |
|---|---|
| 10/100/1000 Ethernet ports | 1 |
Peripherals
| Details | |
|---|---|
| MiniPCI slots | 1 |
| Number of USB ports | 1 |
| USB slot type | USB type A |
| Max USB current (A) | 1 |
Other
| Details | |
|---|---|
| Voltage Monitor | Yes |
-
Ethernet test results
| RB411GL | AR7161 1G all port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none | 58.0 | 704.4 | 171.9 | 704.1 | 187.3 | 95.9 |
| Bridging | 25 bridge filter rules | 58.5 | 710.4 | 84.5 | 346.1 | 86.4 | 44.2 |
| Routing | none | 59.7 | 725.0 | 136.1 | 557.5 | 147.0 | 75.3 |
| Routing | 25 simple queues | 55.2 | 670.3 | 117.7 | 482.1 | 137.0 | 70.1 |
| Routing | 25 ip filter rules | 54.7 | 664.3 | 59.4 | 243.3 | 59.2 | 30.3 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Downloads
RB411-UserGuide.pdf (1.62 MB)
RB411-QuickGuide.pdf (0.38 MB)
RB400L_differences.pdf (3.46 MB)
RB411L-Brochure.pdf (1.03 MB)
