Produktbeschreibung
Dieses Produkt ist EOL - End of Life.
-
Die 400L ist die neue "low cost" Serie. Das RB411GL besitzt einen miniPCI slot, eine Gigabit Ethernet-Schnittstelle sowie eine USB-Schnittstelle für UMTS/3G-Sticks oder zusätzlichen Speicher. Verwenden Sie dieses Board in einem Outdoor-Gehäuse als AP oder für eine Punkt-zu-Punkt Verbindung. Der MiniPCI Steckplatz erlaubt Ihnen Ihr bevorzugtes W-Lan Modul zu nutzen. Der Gigabit Netzwerkanschluss erlaubt Ihnen alle Vorzüge von 802.11n MIMO zu nutzen. Es wird von einer 680MHz Atheros AR7161 Netzwerk-CPU betrieben und verfügt über 64MB RAM sowie eine RouterOS L4 License.
-
Specifications
Details | |
---|---|
Product code | RB411GL |
Architecture | MIPSBE |
CPU | AR7161 |
CPU core count | 1 |
CPU nominal frequency | 680 MHz |
Dimensions | 105x105mm |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 64 MB |
Storage size | 64 MB |
Storage type | NAND |
Tested ambient temperature | -40°C .. +70°C tested |
Powering
Details | |
---|---|
Max Power consumption | 13.6W |
PoE in | Passive PoE |
PoE in input Voltage | 8-30 V |
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 8-30 V |
Ethernet
Details | |
---|---|
10/100/1000 Ethernet ports | 1 |
Peripherals
Details | |
---|---|
MiniPCI slots | 1 |
Number of USB ports | 1 |
USB slot type | USB type A |
Max USB current (A) | 1 |
Other
Details | |
---|---|
Voltage Monitor | Yes |
-
Ethernet test results
RB411GL | AR7161 1G all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none | 58.0 | 704.4 | 171.9 | 704.1 | 187.3 | 95.9 |
Bridging | 25 bridge filter rules | 58.5 | 710.4 | 84.5 | 346.1 | 86.4 | 44.2 |
Routing | none | 59.7 | 725.0 | 136.1 | 557.5 | 147.0 | 75.3 |
Routing | 25 simple queues | 55.2 | 670.3 | 117.7 | 482.1 | 137.0 | 70.1 |
Routing | 25 ip filter rules | 54.7 | 664.3 | 59.4 | 243.3 | 59.2 | 30.3 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Downloads
RB411-UserGuide.pdf (1.62 MB)
RB411-QuickGuide.pdf (0.38 MB)
RB400L_differences.pdf (3.46 MB)
RB411L-Brochure.pdf (1.03 MB)